Digital vibration sensor IVD 3
Category: Vibration digital equipment
The sensor is used in vibration monitoring and protection systems. The sensor is designed for employment in explosion proof zones of the premises and external installations where flammable vapor and gas-air-mixtures, of the categories IIA, IIB, IIC, group T1-T5 may be formed.
The sensor is used for RMS Velocity (mm/s) / vibration acceleration (m/s2) measurements in one or three mutually perpendicular axes.
General data
- Vibration RMS Velocity (mm/s) measurement;
- Vibration Acceleration (m/s2) measurement;
- Signal decomposition using the FFT method;
- Data exchange due to interface RS-485 (Modbus RTU);
- Current output signal 4-20 mA proportional to RMS Velocity;
- Current output signal 10 ± 10 mA (non-standardized) proportional to peak Acceleration;
- Output discrete signals (30 VDC, 100 mADC);
- Status generation («Warning», «Alarm », «Normal»);
- Field programmable set point & alarm levels;
- Field programmable bode rate, address (RS-485);
- Remote sensor calibration.
Technical specifications
| RMS Velocity measurement range (8000-coefficient, mm/s2, f – frequency, 1/s) | 0,1 to 8000*f-1, mm/s |
| Acceleration measurement range | 0,008 to 40 m/s2 |
| Frequency range | 10 to 1000 Hz |
| Output current signal RMS Velocity | 4 - 20 mA |
| Output current signal Acceleration | 10 ± 10 mA (non-standardized) |
| Essential relative error (full scale)/measurement tolerance, RMS Velocity | 6 % |
| Essential relative error (full scale)/measurement tolerance, Acceleration | 6 % |
| Transverse Sensivity | 5 % |
| Noise | 0,03 mm/s max. |
| Power supply | 10 ÷ 24 VDC (60 mA – without discrete signals) |
| Operating temperature range | -60 ÷ + 80 °C |
| Update time | 1 s |
| Settling time | 10 s max |
| Case protection class | IP67 |
| Explosion proof marking | PB ExdIX /1ExdIICT5X |
| Weight (with cable 3.5 m) | 1,2 kg |
Design
- Housing material – nickel-coated steel;
- Explosion protection type – Flameproof enclosure “d”
Sensor versions
- IVD-3 – digital (RS-485) output;
- IVD-3CV - digital (RS-485)/current (RMS Velocity, 4-20 mA) output;
- IVD-3CA - digital (RS-485)/current (Acceleration, 10 ± 10 mA) output;
- IVD-3D - digital (RS-485)/discrete (30 VDC, 100 mADC) output.
Basic connections
Modifications
IVD-3X-W-KYMZ
X – Output signal type:
“-” – digital (RS-485);
CV - digital (RS-485)/current (RMS Velocity, 4-20 mA) output;
CA - digital (RS-485)/current (Acceleration, 10 ± 10 mA) output;
D - digital (RS-485)/discrete (30 VDC, 100 mADC) output.
W – measurement axes:
1 – one axis vibration measurement;
3 – three axes vibration measurement.
KY – Permanent attached cable length, 1,5 to 20 m.
MZ – Protection metal hose length, 0 to 15 m.
