+7 (343) 356-51-11
Send a request
+7 (343) 356-51-11

ECOM-3000 data acquisition and transmission device

Category: Software ARIS MD, ARIS MC, ARIS MT

ECOM-3000 data acquisition and transmission device is designed for data acquisition from different analog and digital metering devices, pressure and temperature sensors, I/O modules etc., its processing and storage. It provides transmission of the data to higher control levels. It also provides a necessary set of functions to be implemented in automated metering infrastructure systems, telecontrol systems, data acquistion and transmission systems.

Key functions

  • data acquistion of revenue and technical metering data from meters of a different type, its storage in non-volatile memory as short, basic, daily, monthly and annual archives;
  • measurement and calculation of the following parameters: consumption (by mass, by volume at operating and standard conditions), pressure, temperature, density, enthalpy, caloricity, mass, volume;
  • telemetry data acquisition from measurement transducers and electric energy meters;
  • analog and binary data acquisition from I/O modules;
  • telecontrol signals transmission;
  • execution of user-defined algorithms, interlocking algorithms;
  • acquired data processing, additional calculation procedures according to preset algorithms;
  • precise time signal distribution;
  • data exchange with adjacent systems using different communication protocols;
  • transmission of independent datasets to higher control levels (up to 5 directions) using different communication protocols.

Hardware modifications

  • ECOM-3000 Т;
  • ECOM-3000 R;
  • ECOM-3000 S.

Key features

  • number of metering channels – up to 3000;
  • supported number of metering devices – up to 100;
  • processing of up to 80 user-defined algorithms;
  • integrated real-time clock;
  • built-in GPS/GLONASS-receiver;
  • has no fans or other moving parts;
  • real-time operating system.

Additional features

  • light indication of operating modes;
  • alarm signaling and self-supervision.

Communication protocols

  • various Modbus-like communication protocols for communication with electric energy meters (more than 130 supported devices);
  • Modbus (RTU/ASCII/TCP);
  • IEC 60870-5-101;
  • IEC 60870-5-104;
  • Granit;
  • TM800A;
  • CRQ;
  • Proprietary communication protocols.

EKOM-3000Т communication ports

  • 1/2 x Ethernet 10/100/1000 Base-Tx;
  • 3/5 х RS-232;
  • 4/8/16 x RS-485.

ECOM-3000R communication ports

  • 1/2 x Ethernet 10/100/1000 Base-Tx (basic);
  • expansion modules (up to 5);
  • 2/4 х RS-232;
  • 4/8 х RS-232;
  • 16/32 binary input channels;
  • 48/96 binary input/output channels;
  • 16/32 analog input channels.

ECOM-3000S communication ports

  • 1/2 x Ethernet 10/100/1000 Base-Tx (basic);
  • expansion modules (up to 5);
  • 2/4 х RS-232;
  • 4/8 x RS-485;
  • 16/32 binary input channels;
  • 48/96 binary input/output channels;
  • 16/32 analog input channels.

Power supply

  • ECOM-3000Т: 18-36 VDC, power consumption – 30 W, 2 power supplies;
  • ECOM-3000R: 100-240 VDC, power consumption – 40 W, 2 power supplies;
  • ECOM-3000S: 100-240 VDC, power consumption – 40 W, 2 power supplies.

Dimensions

  • ECOM-3000Т: 166x205x157 mm (WxDxH). );
  • ECOM-3000R: 482x496x177 mm (WxDxH);
  • ECOM-3000S: 440x315x90 mm (WxDxH);

Operating temperature

-20... +55 °C